TeaBot automatic Tea Maker / Tea Timer
von SnakeP
Druckbare Dateien (9)
-
stlTeaBot_Bottom_Part.stl
1.4 Mo · 228 Downloads
-
stlTeaBot_Base.stl
1.8 Mo · 249 Downloads
-
stlTeaBot_Arm_LH.stl
1.4 Mo · 228 Downloads
-
stlTeaBot_Arm_RH.stl
1.3 Mo · 228 Downloads
-
stlTeaBot_Top.stl
5.7 Mo · 248 Downloads
-
stlTeaBot_kinematic_arm_high.stl
3.6 Mo · 173 Downloads
-
stlTeaBot_kinematic_arm_low.stl
4.1 Mo · 172 Downloads
-
stlTeaBot_Controler_Cover.stl
993 Ko · 191 Downloads
-
stlTeaBot_Controler_Base.stl
2.4 Mo · 193 Downloads
Beschreibung
UPDATE: Thanks to hpop for improving the Software ;)
https://github.com/hpop/TeaBot-Firmware
Ein kleiner Helfer für Leute wie mich, die Ihren Teebeutel immer zu lange ziehen lassen ;)
TeaBot ist ein vollautomatischer TeeTimer mit einer Kinematik, die den Teebeutel automatisch absenkt und nach Ablauf der Ziehzeit wieder aus dem fertigen Tee hebt.
Die Controler-Box enthält einen 18650 LiIon Akku mit Ladecontroler und die komplette Ansteuerung für den MG996R Servo inkl. Timer und Anzeige.
A little wizzard for people like me who always let their teabag steep for too long ;)
TeaBot is a fully automatic TeeTimer with kinematics that automatically lowers the tea bag and lifts it out of the finished tea after the brewing time has elapsed.
The controller box contains a 18650 LiIon battery with charging controller and the complete control for the MG996R servo including timer and display.
BOM:
1 x 18650 LiIon Battery
1 x Arduino Nano
1 x TM1637 LED 7-Segment Display
1 x MT3608 Step-Up Modul
1 x TP4056 Charging Controler
1 x 6x6mm short-stroke button (Kurzhubtaster)
1 x Mini-Switch (on/off)
1 x JR Servo extension cable
1 x MG996R Servo
8 x M3x25mm Screws
1 x M3x18mm Screw
9 x M3 Self locking nuts
1 x alligator clip (Krokodilklemme)
and some wires ;)