Simple hinge parametric design
von Viragored
Druckbare Dateien (4)
-
stlparametric_basic_light_hinge_socket.stl
130 Ko · 597 Downloads
-
stlparametric_basic_light_hinge_pin.stl
127 Ko · 586 Downloads
-
stlparametric_basic_light_hinge_V2_pin.stl
116 Ko · 330 Downloads
-
stlparametric_basic_light_hinge_V2_socket.stl
119 Ko · 331 Downloads
Beschreibung
I needed a simple hinge to fit something light I was making, and ended up designing this in OpenSCAD. The SCAD file has parameters making it easy to change sizes - height, depth, thickness, bolt hole size. There is a parameter to choose whether to have the bolt-holes aligned with each other, or staggered to stop bolts clashing.
Version 2 of the scad file introduces another option - to have a square edge on the hinge leaf, or leave the curve as in Version 1.
Also provided are stl files for the size I printed.
I used PLA and found it perfectly OK for my project which has a light, acrylic door. If you're making something with a heavier door, this might not be the best for you.