Gridfinity Customizable Container
von jrouvier2
Druckbare Dateien (6)
-
stlbasic_cup_L1_W1_H6_C1_M3_Ly_Fy.stl
177 Ko · 1 134 Downloads
-
stlbasic_cup_L1_W1_H6_C1_M3_Ly_Fy.stl
177 Ko · 933 Downloads
-
stlbasic_cup_L1_W1_H6_C1_M3_Ly_Fn.stl
186 Ko · 992 Downloads
-
stlbasic_cup_L1_W1_H6_C1_M3_Ln_Fn.stl
185 Ko · 1 032 Downloads
-
stlbasic_cup_L4_W4_H6_C9_M3_Ln_Fy.stl
1.9 Mo · 1 181 Downloads
-
stlbasic_cup_L4_W4_H6_C4_M3_Ln_Fn.stl
1.8 Mo · 1 249 Downloads
Beschreibung
Customizable #gridfinity basic container for Zach Freedman's gridfinity system
The OpenScad that drives this is a minor modification of vector76'es original, basically just putting it all in one file and making the configuration a bit easier.
These containers differ from Zach Freedman's containers in that:
- Holes for magnets are optional
- The shelf for a label is optional
- The finger slide at the bottom is optional
- Magnet holes end in a cone, reducing issues with sagging over the magnet holes
- Magnet holes are sized to 6.1mm so a 6mm magnet should press-fit into the hole without needing glue (you can tune this in the customizer)
Attached STL files are examples, you should open in customizer to create your own