Case for ATS25 max-Decoder

von kenaroh

Druckbare Dateien (3)

  • stl

    Patin_Boîtier_ATS25.stl

    27 Ko · 398 Downloads

    Herunterladen
  • stl

    Poignée_Boîtier_ATS25.stl

    513 Ko · 401 Downloads

    Herunterladen
  • stl

    Boîtier_ATS25.stl

    4.1 Mo · 431 Downloads

    Herunterladen

Beschreibung

This box allows the ATS25 max-Decoder receiver to be fitted in a more comfortable position for the user. The front stand can be folded, and as there is a slot for the stylus, it locks the stand in the folded position.

To attach the printed box to the original case, unscrew the 4 screws at the rear and replace them with 6 mm M3 screws. You'll also need 2 x 16 mm M3 screws for the front stand.