Explicit Debugging Sign

I've often thought that some of my shared work areas needed a warning sticker, so here it is. It's actually a sign, but you get the point. The sign is safe-for-work, although now you don't have to be. A warning is now clearly posted. ;)

These STL models are scaled for fast printing with a 0.3mm layer height using a 0.4mm nozzle. If you want to use a more common 0.2mm layer height, I'd suggest scaling the models along the Z axis to 2/3 (66.66%) of that used in the l0p3 (for layer 0.3mm) STL files.

The two-color placard was printed on a single extruder printer using M600 filament change commands that cause prompting for filament changes. These were enabled in the firmware config build options for the self-built Marlin 2.1.2.1 firmware I use on my Monoprice Maker Select v2.1.

The face of the sign is printed directly on the bed of the printer. A nice new bed surface would help.

Take a look at the "Notes" section of the Print Settings below for more printing and design info.