Modular Interlocking Drawers
by CNeeper
Printable files (13)
-
stlAssembledView.stl
12.4 Mo · 6 482 downloads
-
stlInterlockingModule-Large.stl
33 Ko · 6 504 downloads
-
stlInterlockingModule-Medium.stl
25 Ko · 6 384 downloads
-
stl
InterlockingModule-Small.stl
24 Ko · 6 500 downloads
-
stlDrawer-Large.stl
71 Ko · 6 383 downloads
-
stl
Drawer-Medium.stl
74 Ko · 6 354 downloads
-
stl
Drawer-Small.stl
74 Ko · 6 440 downloads
-
stl
DrawerDivider-Large.stl
1 Ko · 6 319 downloads
-
stlDrawerDivider-Medium.stl
1 Ko · 6 205 downloads
-
stl
DrawerDivider-Small.stl
1 Ko · 6 325 downloads
-
stlDrawerHandle.stl
949 Ko · 6 300 downloads
-
stlLockingClip-long.stl
415 Ko · 6 334 downloads
-
stlLockingClip-short.stl
373 Ko · 6 261 downloads
Description
Modular Interlocking Drawers is a set of small-, medium-, and large-sized drawers and drawer modules that can be joined together to create the exact custom drawer array you need.
This is a complete ground-up re-imagining of the wonderfully creative Modular Drawers 2.0 designed by O3D. I don't know if my design should technically be considered a remix since it's completely rebuilt from scratch, but I do know that it likely wouldn't exist without O3D's inspiration. Either way I think credit and kudos are due!
Drawer Modules
Drawer Modules come in three sizes and are held together using removable Locking Clips. The Small Interlocking Modules are exactly 1/2 the size of the Large Interlocking Modules, so the locking slots align perfectly and two small modules can be directly secured to one side of one large module. The Medium Interlocking Module, being 1/3 the size of a large module, has locking slots that may not always align perfectly with a neighbor. However, using a second Medium Interlocking Module will bring the slots back into alignment. (Check out the Modular Parts Drawers (assembled view)).
Drawers
Drawers come in three sizes as listed below. Each drawer has an optional divider that can split the drawer into two sections for additional versatility. Each drawer also sports a label holder that can hold a paper/cardstock label for box identification. Drawers/modules are designed to prevent a drawer from accidentally sliding all of the way out of a module.
Approximate drawer inside dimensions (L x W x H):
- 111mm x 84mm x 82mm -- large
- 111mm x 59mm x 58mm -- medium
- 111mm x 34mm x 35mm -- small