090 - Shellder
by erikfurton
Printable files (10)
-
stlWhite_-_1.stl
90 Ko · 332 downloads
-
stlBody1.stl
90 Ko · 335 downloads
-
stlBlack_-_2.stl
23 Ko · 331 downloads
-
stlWhite_-_1Mirror.stl
90 Ko · 339 downloads
-
stlAny_-_2.stl
30 Ko · 337 downloads
-
stlAny_-_1.stl
33 Ko · 333 downloads
-
stlPurple_-_1.stl
322 Ko · 338 downloads
-
stlPink_-_1.stl
480 Ko · 326 downloads
-
stlPurple_-_2.stl
351 Ko · 334 downloads
-
stlBlack_-_1.stl
360 Ko · 331 downloads
Description
Assemble your own Shellder!
Each component has a flat surface you can print on. The two purple pieces are pretty tricky, and unfortunately require quite a bit of supports.
Tolerances and allowances are made for the FashForge Finder printer. Unfortunately not all printers are the same, so some of your components might be too loose or tight.
Special thanks to http://roestudios.co.uk and Nintendo