Mars Attacks (itself)
by shultiskevin
Printable files (10)
-
stlbattery_lever.STL
18 Ko · 1 048 downloads
-
stldrive_motor_mount.STL
27 Ko · 1 047 downloads
-
stlsled_stem.STL
74 Ko · 1 047 downloads
-
stl4_wheel_base.STL
498 Ko · 1 052 downloads
-
stlramp_shell.STL
688 Ko · 1 059 downloads
-
step4_wheel_full_body.STEP
6.9 Mo · 1 024 downloads
-
stl3_way_solid_shell.STL
1.1 Mo · 1 059 downloads
-
stlball-2.STL
280 Ko · 1 046 downloads
-
stlfriction_wheel.STL
33 Ko · 1 045 downloads
-
stlhole-Martian.STL
9.1 Mo · 1 053 downloads
Description
This is a remix of the design AdamDC came up with for a full body / shell spinner. His brushless motor friction wheel on a sled concept is awesome!
This is my V2 design and my V1 design exploded whenever I got the shell up to speed. V1 had issues. Two versions of the shell are included. A three toothed wacker and a twisty ramp swirly thing that crossed my mind. Still playing around here.
Also, this is designed to print on a 200mm x 200mm bed size.
Here is a BOM:
Electronics and things I crammed in there:
8mm aluminum Rod
Bearing - 608 sized skateboard bearing McMaster #5972k910
C-Clips - McMaster #9853a114
Esc = DasMikro Duel (http://tinyurl.com/ybvkxqxj) or a pair of these EBAY 10a - http://tinyurl.com/y7d8ql88
RX= Hobby King 6 channel to work with the entry level Hobby King HK-T6A Transmitter
Drive Motors= N20's 50:1 (though I think 30:1 would be quicker)
Weapon Motor= DYS BE1806 2300KV brushless (http://tinyurl.com/y8rayba8)
Shell ESC = RaceStar 10a (http://tinyurl.com/yd35e9la)
Battery = Nano-tec 3s 450mah
Wheels = Lego 35mm + the 3d printed lego hub attached
All body screws and hardware are 3mm
belly mounted master switch = i use these DPDT from amazon, (http://tinyurl.com/y6v7nf3m)
The teeth were cut from a sheet of 0.5 thick UHMU purchased from McMaster as well.
Happy spinning.