Micro Digger
by blecheimer
Printable files (12)
-
stlmain_body.stl
314 Ko · 2 074 downloads
-
stlarms.stl
193 Ko · 2 025 downloads
-
stllower_body.stl
159 Ko · 2 046 downloads
-
stlpins.stl
27 Ko · 2 010 downloads
-
stlshovel1.stl
443 Ko · 2 091 downloads
-
stlshovel2.stl
111 Ko · 2 017 downloads
-
stltracks.stl
101 Ko · 2 003 downloads
-
stlflex_pins.stl
91 Ko · 1 947 downloads
-
stldigger_plate.stl
549 Ko · 1 992 downloads
-
stlarm1_with_smaller_joint.stl
686 Ko · 1 999 downloads
-
stlmain_body_with_bigger_holes.stl
314 Ko · 2 019 downloads
-
stltracks_with_bigger_slot.stl
101 Ko · 1 964 downloads
Description
Description:
As I have now a Micro Dumper ( http://www.thingiverse.com/thing:32773 ) I need something to play with. And what matches a Dumper? Right - an excavator.
My Micro Digger is 25 x 25 x 23 mm (1 x 1 x 0.9 in) and has a fully working arm. It comes with two shovels. One is a standard shovel and the other one can be opened.
EDIT
I never liked those axis pins. They are always to loose or it is too hard to push them in. So I design new pins with a flexible clamping zone ("flex pins.stl"). Give them a try.
I just added a plated version of the STL-files for more convinient printing.
EDIT:
I added three new STLs wiht bigger holes and slots for those how have problems with a too tight fit of the parts.