Electronic Component Stackable Drawers
by Husker83
Printable files (21)
-
stlBase_-_20mm_high_fixed.stl
2.8 Mo · 5 798 downloads
-
stl
Base_-_40mm_high.stl
2.9 Mo · 5 949 downloads
-
stl
Top_Plate_flat.stl
102 Ko · 8 551 downloads
-
stl
Top_Plate_with_fence.stl
95 Ko · 8 825 downloads
-
stl
Drawer_-_20mm_-_2_sections_divided_side_to_side.stl
21 Ko · 5 397 downloads
-
stl
Drawer_-_20mm_-_2_sections_divided_front_to_back.stl
23 Ko · 5 339 downloads
-
stlDrawer_-_20mm_-_4_sections.stl
24 Ko · 4 900 downloads
-
stlDrawer_-_20mm_-_5_sections_front_to_back.stl
24 Ko · 4 861 downloads
-
stlDrawer_-_20mm_-_6_sections.stl
28 Ko · 4 831 downloads
-
stlDrawer_-_20mm_-_6_sections_side_to_side_.stl
26 Ko · 4 852 downloads
-
stl
Drawer_-_20mm_-_9_sections.stl
28 Ko · 5 282 downloads
-
stl
Drawer_-_20mm_-_10_sections_with_label_spots.stl
38 Ko · 5 373 downloads
-
stlDrawer_-_40mm_-_2_Sections_divided_front_to_back.stl
22 Ko · 4 915 downloads
-
stl
Drawer_-_40mm_-_2_sections_divided_side_to_side.stl
24 Ko · 5 401 downloads
-
stlDrawer_-_40mm_-_4_sections.stl
24 Ko · 4 894 downloads
-
stl
Drawer_-_40mm_-_4_Sections_Cross.stl
26 Ko · 5 160 downloads
-
stl
Drawer_-_40mm_-_5_sections_front_to_back.stl
24 Ko · 5 159 downloads
-
stl
Drawer__-_40mm_-_6_sections_side_to_side_fixed.stl
27 Ko · 5 163 downloads
-
stl
Drawer_-_40mm_-_9_sections.stl
28 Ko · 5 203 downloads
-
stlDrawer_-_40mm_-_15_sections.stl
35 Ko · 4 853 downloads
-
stl
Drawer_-_40mm_-_30_Sections.stl
49 Ko · 5 232 downloads
Description
Thanks Katraska for the original design.
Changes from original:
-Resized is to print on an Ender 3 (195mm wide)
-I changed the diamond pattern for solid walls whilst keeping the weight slightly less.
-I remade the drawers from scratch to bring down the print time and weight. Drawers are entirely 1mm thickness now for printing with a 0,4mm nozzle set to 0,5mm line width. The base of the drawer is 0.84mm thick for 3 layers at 0.28 (check your slicer doesn't print the first layer thinner as Cura does by default)
-Changed the handle to a custom one. Still prints without supports.
-Rounded the base's corners
-Made the Base's bottom thinner (and extended the locating pin holes to compensate)
-Added an optional fence around the top plate to store more stuff on top without loosing it down the back.
The drawers are 20mm deep (25mm-ish base) and 40mm deep (50mm-ish base)
0.4mm nozzle - Print at 0.28 later height with 0.5mm line width
0.8mm nozzle - Print at 0.4mm later height with 1.0mm line width
Base is about 70 grams each
Drawer is about 90 grams each