Chisel Sharpening Guide
by DustBunny67
Printable files (7)
-
stlSled.stl
418 Ko · 5 973 downloads
-
stl
Base.stl
88 Ko · 5 985 downloads
-
stlKnob_M4.STL
57 Ko · 5 378 downloads
-
stlClamp_1.stl
53 Ko · 5 374 downloads
-
stlClamp_2.stl
53 Ko · 5 369 downloads
-
stl
Clamp_3.stl
53 Ko · 5 733 downloads
-
stlClamp_4.stl
53 Ko · 5 366 downloads
Description
I ordered some diamond sharpening stones like these:-
https://www.ebay.com.au/itm/203122872225?hash=item2f4b110fa1:g:70gAAOSwfCtfdEhd
(Actual stone size is 155 x 67 x 6.5mm but there is sufficient wiggle room to accommodate a slightly larger stone.)
so I thought I would make a honing guide to suit them for my chisels.
I didn't like the homing guides that ride on the surface of the stone as they quite easily mar the surface of the stone so this design uses a running guide style chisel holder.
One side of the carriage is set at 25° for the primary bevel, the other side is set to 30° for the secondary bevel.
EDIT:
I have added some alternate bases to suit the most common whetstones.
See: https://www.thingiverse.com/thing:4678840 for details and files.
They are designed to work with the same carriage as this design so you can just print the appropriate base to suit your stone.