Stackable Ammo Box Parametric
by the_black_bunny
Printable files (27)
-
stlLatch_Arm.stl
81 Ko · 2 523 downloads
-
stlLatch_Cam.stl
41 Ko · 2 505 downloads
-
stlAmmo_Box_9mm_Para.stl
223 Ko · 1 921 downloads
-
stlLid_9mm_Para.stl
189 Ko · 1 881 downloads
-
stepStackable_Ammo_Box_9mm.step
633 Ko · 1 294 downloads
-
stlAmmo_Box_223.stl
270 Ko · 1 839 downloads
-
stlLid_223.stl
187 Ko · 1 831 downloads
-
stlAmmo_Box_45_ACP.stl
231 Ko · 1 820 downloads
-
stlLid_45_ACP.stl
187 Ko · 1 815 downloads
-
stlAmmo_Box_7_62x39.stl
267 Ko · 1 225 downloads
-
stlLid_7_62x39.stl
187 Ko · 1 221 downloads
-
step
Stackable_Ammo_Box_7_62x39.step
650 Ko · 1 232 downloads
-
stlAmmo_Box_308_Winchester.stl
289 Ko · 1 247 downloads
-
stlLid_308_Winchester.stl
187 Ko · 1 236 downloads
-
step
Stackable_Ammo_Box_308_Winchester.step
635 Ko · 1 254 downloads
-
stlAmmo_Box_40_SW.stl
223 Ko · 1 211 downloads
-
stlLid_40_SW.stl
187 Ko · 1 204 downloads
-
step
Stackable_Ammo_Box_40_SW.step
632 Ko · 1 206 downloads
-
stlAmmo_Box_22LR.stl
408 Ko · 1 267 downloads
-
stlLid_22LR.stl
209 Ko · 1 242 downloads
-
step
Stackable_Ammo_Box_22LR.step
2.1 Mo · 1 259 downloads
-
stlAmmo_Box_FN_5.7x28.stl
247 Ko · 934 downloads
-
stlLid_FN_5.7x28.stl
198 Ko · 926 downloads
-
stlAmmo_Box_357_Magnum.stl
415 Ko · 957 downloads
-
stlLid_357_Magnum.stl
390 Ko · 944 downloads
-
stlLid_270_Winchester.stl
388 Ko · 911 downloads
-
stlAmmo_Box_270_Winchester.stl
588 Ko · 923 downloads
Description
This project has been moved to printables. All new versions and calibers will be available at https://www.printables.com/model/295705-stackable-ammo-box-parametric only. Downloading there doesn't cost you but rewards my work.
New print in place latch is available now on printables.
I buy cheap reloads in bulk, which come loosely packaged. To transport my ammo I needed some kind of box, which is why I decided to design one.
I designed this fully parametric in Fusion 360, which allows any caliber to be inputted. I have already added 9mm, 45ACP and .223 Rem / 5.56 NATO.
If you don't have Fusion 360, just drop me a comment with your parameters and I might add your requested stls.
The latch system was inspired by the x82nets Waterproof Box (https://www.thingiverse.com/thing:4838803)
To build this, you need to print one lid, the desired amount of boxes (the stls are all 5 x 10 rounds), 4 latch cams and 4 latch arms per box. Also you need M3x25 screws and nuts (I used and recommend self locking).