FJ40 Custom Dash Knobs
by emancarrillo
Printable files (11)
-
step1971_Large_Switch_BLANK.STEP
109 Ko · 228 downloads
-
step
1971_Heater_Switch_BLANK.STEP
98 Ko · 214 downloads
-
stl1971_Large_Switch_Hazard_STL.STL
1 Mo · 234 downloads
-
stl1971_Large_Switch_Fog_STL.STL
1.1 Mo · 236 downloads
-
stl1971_Large_Switch_Power.STL
1 Mo · 227 downloads
-
stl1971_Large_Switch_12V_STL.STL
1.1 Mo · 229 downloads
-
stl1971_Large_Switch_Question.STL
1.1 Mo · 242 downloads
-
stl1971_Mini_Switch_Front_Locker.STL
1.2 Mo · 232 downloads
-
stl1971_Mini_Switch_Rear_Locker.STL
1.2 Mo · 227 downloads
-
stl1971_Mini_Switch_Compressor.STL
1.2 Mo · 230 downloads
-
stl1971_Heater_Switch_L.STL
1.1 Mo · 235 downloads
Description
Overview:
These are modeled after the early style knobs. Some knobs are at half-height as I am planning on putting them under the dash and wanted them to be lower profile.
Process for those who want to make custom knows:
Download the blank STEP file and cut in your own icon,
You can find good icons to use via Noun Project: Free Icons & Stock Photos for Everything - https://thenounproject.com/.
Either import directly or use it as a guide for your own line art.
I normally try and make the line width 0.75mm wide and 0.50mm deep.
Notes:
Tap the base hole as M5 and the set screw hole as M4.
I use this for the set screw McMaster-Carr - https://www.mcmaster.com/93038A126/
Post Process and Paint Fill Process:
After Tapping the Knobs. I use a spare M5 Screw in a drill to chuck the knob.
I then use Novus 7136 Plastic Polish Kit starting at 3 up to 1 to get the surface a bit shinier.
For the colored paint Fill, I use Enamel paint meant for miniature model painting. I like Humbrol but Testors work great as well.
For White is use a Presto! Multipurpose Correction Pen
If possible use an Ink Syringe with the enamel to fill otherwise I just use a paintbrush or needle to get it filled.
I try and dab most of the paint off. This leaves it pretty messy.
After the paint semi sets up. I take some Goof Off paint remover and wipe the surface clean with a microfiber towel.
I repeat the paint application/wipe removal as needed till I'm happy with the fill.