Shoulder / back / fpv / kite camera mount for Insta360
by D4veee
Printable files (6)
-
stlRAILBLAZA_KITE_BACK_MOUNT.stl
665 Ko · 5 downloads
-
stlrailblaza_to_24mm_pipe.stl
242 Ko · 5 downloads
-
stl23mm_insta360_screw_socket.stl
42 Ko · 5 downloads
-
stlSpacer.stl
687 Ko · 5 downloads
-
stlStarport.stl
773 Ko · 5 downloads
-
stlSwivel.stl
704 Ko · 5 downloads
Description
The system uses the Railblaza mounting standard, similar to the setups from https://www.sailvideosystem.com/.
Shopping ListRailblaza socket: https://pl.aliexpress.com/item/32960681590.html
Two M6 35mm button-head screws with nuts to secure the mount to the Railblaza socket: https://www.amazon.pl/dp/B0DQ3Q33QH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Two M6 30mm and two M6 20mm countersunk screws with nuts to attach the mount to the backplate: https://www.amazon.pl/sto%C5%BCkowym-nakr%C4%99tek-gniazdem-sze%C5%9Bciok%C4%85tnym-maszynowych/dp/B0DQ19Y97B
Aluminum tube with a 23mm inner diameter and 1mm wall thickness, roughly 50cm long: https://allegro.pl/oferta/rura-okragla-aluminiowa-25x23x1mm-1mb-pa38-17529691222
50mm webbing strap: https://allegro.pl/oferta/tasma-nosna-mocna-poliestrowa-p11-50-mm-1-m-czarna-14120665075
30-40mm webbing strap: https://allegro.pl/oferta/tasma-nosna-1-4-mm-mocna-poliestrowa-p11-38-mm-1-m-czarna-14120657585
Two 50mm plastic strap adjusters: https://allegro.pl/oferta/ramka-regulator-plastikowy-do-plecaka-torby-50-mm-1-sztuka-czarny-12653441831
One 50mm plastic side-release buckle: https://allegro.pl/oferta/klamra-zatrzaskowa-plastikowa-50-mm-do-paska-1-sztuk-12787636601
Two 30-40mm plastic strap adjusters: https://allegro.pl/oferta/ramka-regulator-plastikowy-do-paska-torby-plecaka-40-mm-1-sztuka-czarny-12796835269
One 1/4"-20 screw for mounting the Insta360: https://www.amazon.pl/dp/B07JGB52WN?ref=ppx_yo2ov_dt_b_fed_asin_title
- Epoxy resin
I printed everything using ASA filament because I've had bad experiences with PETG on sun. I'm not entirely sure how it will hold up during heavier crashes, but it feels robust.
For the print settings, I used 100% infill on the backplate mainly for added rigidity, and printed the remaining parts at 45% infill.
Assembly NotesYou will need a sewing machine to attach the straps. You can see a great example of how to rig them up in this video:
https://www.youtube.com/watch?v=01jZ09RYz5c&t=125s
Remixes of:
https://www.printables.com/model/284450-railblaza-swivel-starport-adapter
https://www.thingiverse.com/thing:3904843
https://www.thingiverse.com/thing:3847681