Support material gap carousel
por CreativeTools
Archivos imprimibles (11)
-
stlSupport_material_gap_carousel_0.25.stl
1.2 Mo · 1 569 descargas
-
stlSupport_material_gap_carousel_0.30.stl
1.2 Mo · 1 576 descargas
-
stlSupport_material_gap_carousel_0.20.stl
1.2 Mo · 1 584 descargas
-
stlSupport_material_gap_carousel_0.15.stl
1.2 Mo · 1 562 descargas
-
stlSupport_material_gap_carousel_0.10.stl
1.2 Mo · 1 586 descargas
-
stlSupport_material_gap_carousel_0.05.stl
1.3 Mo · 1 558 descargas
-
stlSupport_material_gap_carousel_0.35.stl
1.2 Mo · 1 567 descargas
-
stlSupport_material_gap_carousel_0.45.stl
1.2 Mo · 1 551 descargas
-
stlSupport_material_gap_carousel_0.40.stl
1.2 Mo · 1 553 descargas
-
stlSupport_material_gap_carousel_0.50.stl
1.2 Mo · 1 553 descargas
-
stlSupport_material_gap_carousel_v04_complete.stl
10.6 Mo · 1 755 descargas
Descripción
A carousel of sample shapes with different horizontal gaps to evaluate optimal distances for support material design.
This gauge was inspired by the designs "Sealed Ball Bearing" and "Fully assembled 3D printable wrench" by Thigiverse member barspin, where the necessary support structures where created in the CAD software with a certain gap of air.
With this gauge one can easily test the different adherence between the support surfaces and the 3D model ranging from 0.05 mm to 0.5 mm in steps of a twentieth of a millimetre.
Since 3D print tolerances can vary according to variations in 3D print settings and filament diameter, this gauge can be used to evaluate the best support gap before 3D modelling the structures in CAD.
Barspins original things can be found as follows:
- http://www.thingiverse.com/thing:143494
- http://www.thingiverse.com/thing:139268
- http://www.thingiverse.com/barspin/designs/
By Creative Tools