Backgammon
por Pompeii17
Archivos imprimibles (8)
-
stlsimplebgboard.stl
3.2 Mo · 3 277 descargas
-
stlaxle.stl
646 Ko · 3 133 descargas
-
stlcheckerset1.stl
42.2 Mo · 3 266 descargas
-
stlrippleboard.stl
7.9 Mo · 3 132 descargas
-
stlstarboard2.stl
3.2 Mo · 3 098 descargas
-
stlchecker1.stl
2.8 Mo · 3 131 descargas
-
stlchecker2.stl
237 Ko · 3 079 descargas
-
stlcheckerset2.1.stl
13.5 Mo · 3 105 descargas
Descripción
Backgammon set that should close together with all the checkers inside; 2 dice needed but not included.
One side of board: 201.8mm x120.4mm x11.8mm
Checker: 7.5 mm radius, 5.5 mm height
Printing: The simplebgboard.stl and axle.stl files must both be printed twice. If scaled down, the axle probably won't fit, my suggestion is to try a piece of wire or a paper clip. A paper clip can be bent to form the hook on the front. The checkerset files print a full set of 15 checkers. Print twice in different colors. I have included a separate checker file in case replacements are needed. This is a link on rules and how to play http://usbgf.org/learn-backgammon/backgammon-rules-and-terms/rules-of-backgammon/ . Enjoy.