Simple Stacking System
por Urbanist
Archivos imprimibles (8)
-
stlSimpleStackingSystem_Drawer.stl
317 Ko · 2 851 descargas
-
stlSimpleStackingSystem.stl
1.1 Mo · 2 866 descargas
-
stlSimpleStackingSystem_CL.stl
932 Ko · 2 792 descargas
-
stlSimpleStackingSystem_CT.stl
932 Ko · 2 766 descargas
-
stlSimpleStackingSystem_CT_CR.stl
660 Ko · 2 800 descargas
-
stlSimpleStackingSystem_CT_CL.stl
701 Ko · 2 766 descargas
-
stlSimpleStackingSystem_CR.stl
919 Ko · 2 790 descargas
-
stlSimpleStackingSystem_Drawer_high_sides.stl
327 Ko · 2 024 descargas
Descripción
Just another stacking container system.
Original size is 50x50x60mm but u should be able to scale it in ur slicer in case needed.
Parts fit tight so make sure ur printer is calibrated.
On the file list CT = Clean Top ; CR = Clean Right and so on...
Edit:
I edited the fittings to be a bit more loose, since connecting single boxes worked well but connecting edges was a little too hard. Now everything should fit a little bit easier.
Let me know how it works for u.
In case u have any suggestions on drawers etc. let me know.