Waveform Surface

por sentamugo7

Archivos imprimibles (7)

  • stl

    circle_square.stl

    2.2 Mo · 582 descargas

    Descargar
  • stl

    triangle_triangle.stl

    59.7 Mo · 589 descargas

    Descargar
  • stl

    sine_triangle.stl

    62.1 Mo · 588 descargas

    Descargar
  • stl

    fourier_fourier.stl

    62.4 Mo · 582 descargas

    Descargar
  • stl

    sine_sine.stl

    62.2 Mo · 594 descargas

    Descargar
  • stl

    fourier_fourier_2.stl

    27.7 Mo · 602 descargas

    Descargar
  • stl

    fourier_triangle.stl

    27.5 Mo · 588 descargas

    Descargar

Descripción

This creates a customizable surface where both the x and y axis are an independent waveform. There is an option for a Fourier Transform - like waveform. Start with low smooth (faster render) and change the parameters until you find a surface that you like, then move the smooth higher (slower render) and press the "Create Thing" button.

Note - the square and sawtooth waveforms will not print correctly for high smoothness,
since the vertical drop will be too thin.

Infill - about 30%
Support - this will cause marks on the underside, depending on the surface, you can try without support