Steam Engine Train Leviathan
por mardur
Archivos imprimibles (65)
-
stlrail-slab_many.stl
4 Ko · 2 185 descargas
-
stldrive-link1_x2.stl
38 Ko · 2 154 descargas
-
stlrailing_x2.stl
403 Ko · 2 164 descargas
-
stlheadlight-base.stl
341 Ko · 2 171 descargas
-
stlaxle-front-L.stl
265 Ko · 2 151 descargas
-
stlaxle-front-R.stl
270 Ko · 2 145 descargas
-
stlboiler4.stl
481 Ko · 2 147 descargas
-
stlpressure-pipe.stl
794 Ko · 2 153 descargas
-
stlcabin-bottom.stl
136 Ko · 2 145 descargas
-
stlboiler1-handrail-L.stl
191 Ko · 2 151 descargas
-
stlcabin-top-L.stl
40 Ko · 2 151 descargas
-
stlcontrol-lever.stl
52 Ko · 2 147 descargas
-
stlboiler-ring2.stl
94 Ko · 2 155 descargas
-
stlboiler5.stl
343 Ko · 2 157 descargas
-
stlconnector-pipe_x2.stl
379 Ko · 2 144 descargas
-
stlaxle-connector_x4.stl
724 Ko · 2 149 descargas
-
stldrive-rod_x2.stl
83 Ko · 2 150 descargas
-
stlrail-200_x2.stl
146 Ko · 2 146 descargas
-
stldrive-link2_x2.stl
27 Ko · 2 149 descargas
-
stlboiler-ring5-bell.stl
293 Ko · 2 156 descargas
-
stlaxle-socket+0.5_x4.stl
186 Ko · 2 147 descargas
-
stlpressure-socket.stl
100 Ko · 2 146 descargas
-
stlboiler6.stl
296 Ko · 2 144 descargas
-
stlheadlight-glass.stl
69 Ko · 2 139 descargas
-
stlwheel-small_x4.stl
825 Ko · 2 145 descargas
-
stlcabin-top-F.stl
138 Ko · 2 152 descargas
-
stlfender-bar-R.stl
23 Ko · 2 154 descargas
-
stlfender.stl
546 Ko · 2 149 descargas
-
stlwheel-large_x4.stl
282 Ko · 2 179 descargas
-
stlwheel-screw-cap_x4.stl
166 Ko · 2 155 descargas
-
stlcenter-rail-R.stl
190 Ko · 2 159 descargas
-
stlboiler1-handrail-R.stl
191 Ko · 2 145 descargas
-
stlcontrol-panel.stl
880 Ko · 2 156 descargas
-
stldrive-cylinder-R.stl
540 Ko · 2 156 descargas
-
stlcabin-top-R.stl
40 Ko · 2 158 descargas
-
stlpressure-outlet_x2.stl
571 Ko · 2 155 descargas
-
stldrive-guide-top_x2.stl
22 Ko · 2 152 descargas
-
stlboiler2.stl
255 Ko · 2 157 descargas
-
stlheadlight-socket-R.stl
278 Ko · 2 154 descargas
-
stlaxle-socket-cap+0.5_x4.stl
201 Ko · 2 146 descargas
-
stlheadlight.stl
122 Ko · 2 154 descargas
-
stlfender-bar-L.stl
23 Ko · 2 149 descargas
-
stlboiler1.stl
307 Ko · 2 145 descargas
-
stlcabin-glass-rear_x2.stl
69 Ko · 2 140 descargas
-
stlcabin-glass-front-large_x2.stl
1 Ko · 2 140 descargas
-
stlcabin-glass-front-small_x2.stl
1 Ko · 2 143 descargas
-
stldrive-guide-bottom-L.stl
7 Ko · 2 152 descargas
-
stlexhaust.stl
954 Ko · 2 169 descargas
-
stlcabin-top-B.stl
58 Ko · 2 152 descargas
-
stlheadlight-socket-L.stl
278 Ko · 2 148 descargas
-
stlcabin-roof-L.stl
79 Ko · 2 155 descargas
-
stlcabin-glass-side_x4.stl
1 Ko · 2 138 descargas
-
stlboiler-ring3_x3.stl
71 Ko · 2 153 descargas
-
stlcabin-roof-R.stl
79 Ko · 2 159 descargas
-
stlboiler3.stl
197 Ko · 2 148 descargas
-
stlboiler-ring1.stl
72 Ko · 2 153 descargas
-
stlvent-pipe.stl
466 Ko · 2 149 descargas
-
stlcenter-rail-L.stl
190 Ko · 2 147 descargas
-
stldrive-guide-bottom-R.stl
7 Ko · 2 149 descargas
-
stlbell.stl
1.2 Mo · 2 147 descargas
-
stlboiler8.stl
1.9 Mo · 2 171 descargas
-
stlpressure-cap.stl
571 Ko · 2 166 descargas
-
stldrive-cylinder-L.stl
540 Ko · 2 156 descargas
-
stlboiler7.stl
3.4 Mo · 2 166 descargas
-
stldrive-cap_x2.stl
241 Ko · 2 155 descargas
Descripción
Detailed steam engine train loosely modeled after the number 63 Leviathan.
Matching tender is available at https://www.thingiverse.com/thing:4772254
The model is not to any scale and not an accurate replica, particularly for the wheel sockets and the cabin.
Most parts can be printed without or only very little support. Careful, there are more than 100 pieces to the entire model. If parts are to be printed multiple times, the amount is indicated in brackets in the filename.
A standard LED can be placed inside the lantern and cables will run inside the model towards the cabin. Another LED might be placed loosely inside the boiler to indicate the burning fire.
The details in the model are designed to be printed with 0.4mm nozzle FDM at 0.2mm layer height. I personally printed it on an Ender 3 in PLA. Most parts will be glued in place. Some parts (especially the wheels) are supposed to be attached with M2x20mmm screws. Any other diameter or length will not fit. Sorry about that.
The wheels and drive mechanism are theoretically moving, but at least for my print, the tolerances are too tight for smooth movement. I am not particularly happy with the wheel sockets either. I should come up with a better solution there.