Stackable Baskets (v2, "real" baskets)
por vivamus3d
Archivos imprimibles (43)
-
stlStackableBasketV2-30x10x7.5.stl
10.3 Mo · 1 503 descargas
-
stlStackableBasketV2-29x10x7.5.stl
10 Mo · 1 258 descargas
-
stlStackableBasketV2-28x10x7.5.stl
9.7 Mo · 2 092 descargas
-
stlStackableBasketV2-27x10x7.5.stl
7.5 Mo · 1 258 descargas
-
stlStackableBasketV2-26x10x7.5.stl
7.3 Mo · 1 257 descargas
-
stlStackableBasketV2-25x10x7.5.stl
7 Mo · 1 314 descargas
-
stlStackableBasketV2-24x10x7.5.stl
6.8 Mo · 1 280 descargas
-
stlStackableBasketV2-23x10x7.5.stl
6.5 Mo · 1 259 descargas
-
stlStackableBasketV2-22x10x7.5.stl
6.3 Mo · 1 306 descargas
-
stlStackableBasketV2-21x10x7.5.stl
6 Mo · 1 272 descargas
-
stlStackableBasketV2-20x10x7.5.stl
5.8 Mo · 1 426 descargas
-
stlStackableBasketV2-19x10x7.5.stl
5.5 Mo · 1 275 descargas
-
stlStackableBasketV2-18x10x7.5.stl
5.2 Mo · 1 339 descargas
-
stlStackableBasketV2-17x10x7.5.stl
4.9 Mo · 1 279 descargas
-
stlStackableBasketV2-16x10x7.5.stl
4.7 Mo · 1 264 descargas
-
stlStackableBasketV2-15x10x7.5.stl
4.4 Mo · 1 303 descargas
-
stlStackableBasketV2-14x10x7.5.stl
4.1 Mo · 1 259 descargas
-
stlStackableBasketV2-13x10x7.5.stl
3.9 Mo · 1 257 descargas
-
stlStackableBasketV2-12x10x7.5.stl
3.7 Mo · 1 263 descargas
-
stlStackableBasketV2-11x10x7.5.stl
3.4 Mo · 1 258 descargas
-
stlStackableBasketV2-10x10x7.5.stl
3.1 Mo · 1 338 descargas
-
stlStackableBasketV2s-30x10x7.5.stl
922 Ko · 1 203 descargas
-
stlStackableBasketV2s-29x10x7.5.stl
904 Ko · 1 167 descargas
-
stlStackableBasketV2s-28x10x7.5.stl
882 Ko · 1 171 descargas
-
stlStackableBasketV2s-27x10x7.5.stl
843 Ko · 1 165 descargas
-
stlStackableBasketV2s-26x10x7.5.stl
820 Ko · 1 168 descargas
-
stlStackableBasketV2s-25x10x7.5.stl
790 Ko · 1 188 descargas
-
stlStackableBasketV2s-24x10x7.5.stl
768 Ko · 1 168 descargas
-
stlStackableBasketV2s-23x10x7.5.stl
734 Ko · 1 174 descargas
-
stlStackableBasketV2s-22x10x7.5.stl
724 Ko · 1 174 descargas
-
stlStackableBasketV2s-21x10x7.5.stl
672 Ko · 1 165 descargas
-
stlStackableBasketV2s-20x10x7.5.stl
650 Ko · 1 218 descargas
-
stlStackableBasketV2s-19x10x7.5.stl
617 Ko · 1 170 descargas
-
stlStackableBasketV2s-18x10x7.5.stl
594 Ko · 1 194 descargas
-
stlStackableBasketV2s-17x10x7.5.stl
570 Ko · 1 171 descargas
-
stlStackableBasketV2s-16x10x7.5.stl
555 Ko · 1 176 descargas
-
stlStackableBasketV2s-15x10x7.5.stl
501 Ko · 1 199 descargas
-
stlStackableBasketV2s-14x10x7.5.stl
482 Ko · 1 178 descargas
-
stlStackableBasketV2s-13x10x7.5.stl
461 Ko · 1 175 descargas
-
stlStackableBasketV2s-12x10x7.5.stl
443 Ko · 1 177 descargas
-
stlStackableBasketV2s-11x10x7.5.stl
406 Ko · 1 173 descargas
-
stlStackableBasketV2s-10x10x7.5.stl
382 Ko · 1 219 descargas
-
stlBasket4Pavel-22x10.stl
727 Ko · 1 184 descargas
Descripción
This is a remix of my own stackable baskets (version 1) I created about a year ago. Although I was quite happy with them, I thought I could save even a bit more on filament by making them "real baskets", i.e. having honeycombs everywhere including the bottom.
I also added fillets everywhere - doesn't really save much on filament, but can have a beneficial effect on stability because layers are slightly shifted against each other at the rounded edges.
Disadvantage of the new design: longer print times and larger model files (mostly due to all the rounded edges (fillet))
BTW: Latest models now also available at Printables: Stackable Baskets
UPDATE 2022-03-06: Although the filleted combs are very strong when the print is finished, some very narrow bridging is required during the print. It looks like some printers have problems with this, leading to broken combs. Seems to happen only when large baskets have to be placed diagonally to fit on bed. (Never had any issues with baskets placed normally).
Therefore I created a complete set without fillets, which seems to print easier. These models are called "...V2s" for "straight". And the difference in filament usage is neglectable.(For even less filament, try version 1b of the old design with initial layers 0 and only to top layers)
The new version comes with the same sizes and l as the previous and can freely be mixed. (depth between 10 and 30cm, width: 10cm, heigth. 7.5cm). The red and blue one on the picture are version 1, the yellow ones are version 2. And as before you can stick a paper label to the front
If you have smaller objects which might fall through the bottom holes or have an uneven surface that might hook somewhere at the honycombs - stick to version 1 or new v1b.
If you'd like different sizes, write a comment.
For the time being, you can ignore the special 22cm model I uploaded today. It has slightly reduced comb sizes and I created this on request to overcome some print issues. - might delete it later