Caverna Storage Solution - version 2

por LennartS

Archivos imprimibles (10)

  • stl

    top_2.STL

    99 Ko · 3 598 descargas

    Descargar
  • stl

    top_3.STL

    127 Ko · 3 587 descargas

    Descargar
  • stl

    top_1.STL

    156 Ko · 3 610 descargas

    Descargar
  • stl

    bottom_3.STL

    155 Ko · 3 569 descargas

    Descargar
  • stl

    bottom_1.STL

    183 Ko · 3 590 descargas

    Descargar
  • stl

    bottom_tray.STL

    103 Ko · 3 657 descargas

    Descargar
  • stl

    top_tray.STL

    370 Ko · 3 579 descargas

    Descargar
  • stl

    bottom_2.STL

    179 Ko · 3 578 descargas

    Descargar
  • stl

    bottom_4.STL

    144 Ko · 3 565 descargas

    Descargar
  • stl

    top_4.STL

    119 Ko · 3 585 descargas

    Descargar

Descripción

I really liked the storage solutions from wtwerner and wanted to improve on them a little bit. I have added some rounded corners for the small pieces and some cutouts for the cards. I also cut the pieces a little different so it holds the parts easier together when you weld them.

Print them up with 10% infill and no support, sand the edges (if necessary) and glue them together.

Etiquetas

#caverna #storage tray