Turtle shell container
por PLA_N_PA
Archivos imprimibles (24)
-
stlRed_2_Tri_Hex_1.stl
59 Ko · 3 952 descargas
-
stl
Red_2_Hex_1.stl
478 Ko · 3 876 descargas
-
stl
Red_1_Tri_Hex_1.stl
187 Ko · 3 869 descargas
-
stl
Red_6_Tri_Hex_1.stl
77 Ko · 3 858 descargas
-
stl
Red_4_Tri_Hex_1.stl
181 Ko · 3 852 descargas
-
stl
Tan_Bottom_Shell_outside_Tail.stl
537 Ko · 3 869 descargas
-
stlTan_Bottom_Shell_outside_legs.stl
528 Ko · 3 857 descargas
-
stlRed_Top_Hex.stl
761 Ko · 3 870 descargas
-
stlTan_Bottom_Shell_outside_Head.stl
1.4 Mo · 3 863 descargas
-
stlWhite_Left_Trim_Final.stl
1.5 Mo · 3 866 descargas
-
stl
Red_6_Hex_1.stl
503 Ko · 3 847 descargas
-
stlRed_3_Hex_1.stl
494 Ko · 3 847 descargas
-
stlTan_Bottom_Shell_outside_Arms.stl
638 Ko · 3 849 descargas
-
stl
Black_Bottom_Shell_inside_Marked.stl
1.7 Mo · 3 869 descargas
-
stlWhite_Right_Trim_Final.stl
1.4 Mo · 3 866 descargas
-
stlRed_5_Tri_Hex_1.stl
60 Ko · 3 850 descargas
-
stlRed_5_Hex_1.stl
478 Ko · 3 850 descargas
-
stl
White_Trim_pin_need_2.stl
424 Ko · 3 845 descargas
-
stl
White_trim_one_piece.stl
2 Mo · 3 862 descargas
-
stl
Red_3_Tri_Hex_1.stl
74 Ko · 3 841 descargas
-
stl
Red_4_Hex_1.stl
278 Ko · 3 839 descargas
-
stlRed_1_Hex_1.stl
281 Ko · 3 849 descargas
-
stl
Black_Top_Shell_inside_Final.stl
1.6 Mo · 3 898 descargas
-
stlTan_Bottom_Shell_outside_belly.stl
874 Ko · 2 013 descargas
Descripción
I’m super pleased, Super Mario!! pleased to be releasing my new turtle shell design.
Just can’t wait to see the Movie being released this year!!
Created this turtle shell to be printed out in corresponding colors and assembled to eliminate any need to paint the final product.
NOTE The game organizer insert, along with the spikes and the proper hex pices for the spikes are NOT included with this FREE design
If you enjoy this free design and wish to support more designs like this, Please consider purchasing the spiked shell version of the design with the switch game organizer insert located here,
https://cults3d.com/en/3d-model/art/spiked-turtle-shell-switch-game-organizer
I designed the top portion of the shell to be easily removed with the addition of 4 magnets sized 8 x 3mm
https://www.amazon.com/gp/product/B09ZFCJ59V/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
All parts are oriented to the build plate correctly, and are super simple to print. There is only 4 parts that will need supports, the split white trim pieces, and the bottom outside tail and head.
Once all parts are printed assembly should be a breeze. The Hex pieces in the top shell are all numbered to their corresponding locations in the top shell inside hub, and are easily inserted in place when gluing together.
The flat mark on the belly outside piece should be directed towards the tail end of the bottom inside hub marked with the “T”. The “T” designates the tail end of the bottom inside hub. It should be self-explanatory where the other bottom outside pieces fit in the bottom hub.
I recommend printing the Trim pieces separate with supports, then using the trim pins to glue the two halves together, but if you want to print it as one piece, I included a one-piece trim part in the listing.
With the trim printed and assembled, it should be glued to the completed bottom shell.
When adding the magnets to the printed pieces be sure to orient them correctly so the completed top shell falls in place and in held to the rest of the shell.
Thanks for checking out my Turtle Shell Container, and if you could please post a make. I would love to see your print.
You can follow me on instagram, https://www.instagram.com/pla.n.pa/
to find out what I designs I am currently working on.
If your interested in selling prints of my designs, become a Patreon supporter here…
https://www.patreon.com/planpa3d
Ash tray insert for the shell created by patreon supporter DREIDGEDRUCKT found here…
https://cults3d.com/en/3d-model/gadget/koopa-bowser-turtle-shell-ashtray-insert
Happy Printing,
Jeremiah