Supportless Kazoo

di elk

File stampabili (6)

  • stl

    kazoo_body.stl

    1.6 Mo · 6 313 download

    Scarica
  • stl

    valve_inner.stl

    251 Ko · 6 031 download

    Scarica
  • stl

    valve_outer.stl

    229 Ko · 6 093 download

    Scarica
  • stl

    30mm_dose.stl

    208 Ko · 6 118 download

    Scarica
  • stl

    30mm_membranhalter.stl

    146 Ko · 6 058 download

    Scarica
  • stl

    snuffelstucke.stl

    119 Ko · 5 966 download

    Scarica

Descrizione

Just a derivate of http://www.thingiverse.com/thing:17455 that is printable without support material. It has one additional part. Highest part is 94mm high (a bit less than the original due to possibilities of my mendel...). There are two different sizes of the membrane holder... smaller one works, bigger one still printing printed and working even better than smaller one. due to greater membrane diameter, it seems to work better with lower ferquencies... I would suggest to try the 30mm version.

the picture shows my print in clear PLA (oops some black found its way out the nozzle too...) with the smaller membrane housing.

If you like it, you can check and comment my other designs here: http://www.thingiverse.com/elk/things

Tag

#3D #experiment #featured #instrument #makerbot #mendel #music #PLA #prusa #reprap #sound #supportless #toy