Factorio Train

di warmarine759

File stampabili (6)

  • stl

    factorio_wagon_only.stl

    1.2 Mo · 4 105 download

    Scarica
  • stl

    factorio_train_keychain.stl

    7.3 Mo · 4 142 download

    Scarica
  • stl

    factorio_train_only.stl

    4.9 Mo · 4 225 download

    Scarica
  • stl

    factorio_train_NO_HOLES.stl

    6.2 Mo · 4 093 download

    Scarica
  • stl

    Factorio_Fuild_Wagon_NO_HOLES.stl

    15.3 Mo · 3 688 download

    Scarica
  • stl

    Factorio_Fuild_Wagon_only.stl

    8.4 Mo · 3 699 download

    Scarica

Descrizione

The Factorio locomotive made into a keychain! each piece is ~33mm long with the holes in the center being 2mm across

I used 7 strand steel beading wire. to thread through the pieces then leaving a little under the length of the last wagon extra to loop back into opposite holes. I jammed a piece of copper wire in to keep it from pulling back out and put a nice gob of super glue on the back to keep it from pulling out.

The length is basically as long as you want it to be.

I added the Raw models without holes for those making minis (the bottom isnt totally flat)

Tag

#factorio #keychain #Locomotive #Neat #train