Compact Chisel Sharpening Jig
di ucancallmebob89
File stampabili (7)
-
stlChisel_Sharpener_-_Left_roller.stl
99 Ko · 6 515 download
-
stlChisel_Sharpener_-_Body.stl
155 Ko · 6 538 download
-
stlChisel_Sharpener_-_Right_roller.stl
99 Ko · 6 501 download
-
stlChisel_Sharpener_-_1.0in_Clamp.stl
61 Ko · 6 986 download
-
stlChisel_Sharpener_-_0.75in_Clamp.stl
61 Ko · 6 945 download
-
stlChisel_Sharpener_-_0.5in__Clamp.stl
61 Ko · 6 948 download
-
stepChisel_Sharpener_-_Blank_Clamp.step
54 Ko · 6 213 download
Descrizione
UPDATE: I created a new, simpler chisel sharpening jig:
https://www.thingiverse.com/thing:6109722
https://www.printables.com/model/520488-better-chisel-sharpening-jig
ORIGINAL POST:
My chisel set was pretty dull when I bought them, and they needed sharpening after a couple of projects. I designed this compact chisel sharpening jig to get a consistent angle when I sharpen them.
To find the right angle, push the chisel into the clamp until its face is resting flat on your whetstone. I used the sharpie trick to find the perfect distance (https://www.youtube.com/watch?v=8kzGvtX-h8g).
This design will accommodate chisels or hand plane blades up to 2in wide.
I included clamps for 1in, 0.75in, and 0.5in chisels. If you need other profiles, make your own using the Blank Clamp .step file.
The M4 x 25mm bolts can hold up to 3 clamps for storage as shown in the picture.
Components:
1x - Body
1x - Right Roller
1x - Left Roller
Print as many clamps as you need.
1x - Hex Head M6 x 65mm bolt
1x - M6 nut
2x - Hex Head M4 x 25mm bolt
2x - M4 wing nut
2x - 606ZZ bearing (https://www.amazon.com/gp/product/B075CN43RQ/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1)