USB Microscope Adjustable Base
di Bcjams
File stampabili (8)
-
stlTop.stl
348 Ko · 1 110 download
-
stl
Carriage_Clamp.stl
57 Ko · 1 113 download
-
stl
Ajs_Shaft.stl
416 Ko · 1 105 download
-
stl
Gear.stl
200 Ko · 1 112 download
-
stl
Clamp.stl
108 Ko · 1 118 download
-
stl
Carriage.stl
789 Ko · 1 117 download
-
stl
Base.stl
359 Ko · 1 118 download
-
stl
Rack.stl
444 Ko · 1 109 download
Descrizione
Adjustable base for USB Digital Microscope with a 7-1/2" adjustment range. Base is designed using two 1/2" diameter steel rods. A 'whistlestop' can be ground on each end of the rods to allow the #10-24 setscrews to lock rods into position. I mounted the unit to a piece of aluminum I had in the shop, but it could be mounted to a piece of wood as well.
All mounting holes are modeled with #10-24 threads. I ran a #10-24 tap into each hole to clean up before assembly, The shaft that holds gear is threaded on end with #10-24, and a screw with washer should be inserted to lock shaft in place.
The scope mounting clip allows quick removal of the scope if it is needed to be held by hand for larger objects.