737 MCP Knobs
di 737DIYSIM
File stampabili (9)
-
stlMCP_IAS_KNOB.stl
6.2 Mo · 3 286 download
-
stl
MCP_HDG_KNOB_6mm.stl
3.3 Mo · 3 247 download
-
stl
MCP_HDG_2mm_KNOB.stl
3.3 Mo · 3 167 download
-
stl
MCP_HDG_KNOB_6mm_SHAFT.stl
3.3 Mo · 3 195 download
-
stl
MCP_BANK_KNOB.stl
2.3 Mo · 3 174 download
-
stl
MCP_ALT_KNOB.stl
5.5 Mo · 3 207 download
-
stl
MCP_COURSE_KNOB.stl
4.8 Mo · 3 216 download
-
stl
AP_DISABLE_KNOB.stl
382 Ko · 3 028 download
-
stl
MCP_VS_KNOB_v1.stl
2.7 Mo · 3 047 download
Descrizione
Hi All,
Please find attached my designs for the Boeing 737 MCP Knobs to D print.
I have moved away from the D Shaft shaped internal hole and left it as a 6mm hole. This seems to work well for my encoders and pots.
You will require 3mm grub screws. However, I have found these knobs have fitted tightly without them.
In case you find the knobs loose on first trial fit, shrink them slightly for a tighter fit. I find i have to use a 6.4mm drill post-print to get the knobs to fit correctly on the shafts. But this I believe is down to my cheap printer
If you need any adjustments or alterations, please just let me know.
19/02/20: added recesses to bases to allow knobs to fit over fixture nuts.
19/02/20: added IAS knob which I missed out - Sorry
18/02/20: added a copy of the heading knob with 6mm shaft diameter