Simplus PPE Attachment

I use a CPAP machine to sleep with and decided to try adapting a disposable mask cushion into a face mask. This is specifically for the Simplus face mask, but could potentially be used on anything with a 1.5" diameter intake.

The fit between pieces is a bit loose to allow the filter to be cut a little larger and to fill in the sides. This was a pretty rough design, but it worked pretty well and hoped it might help someone else.

Used glue to seal the holes above the nose that normally allow air out of the mask.

Printed with Atomic Filament's Clear PETG at .2mm layer height.