150G Drum Battlebot
di emancarrillo
File stampabili (6)
-
stl150_motor_holder_001.STL
73 Ko · 762 download
-
stl4mm_spacer.STL
53 Ko · 750 download
-
stl150g_Snail_Drum_001.STL
286 Ko · 882 download
-
stl150_drum_topplate_001.STL
86 Ko · 785 download
-
stl150_drum_base_001.STL
691 Ko · 879 download
-
step150G_DRUM_SPINNER_ASSY_001.STEP
12.4 Mo · 896 download
Descrizione
Drum Robot. This is a 150g combat robot. I'm attaching the .STEP file as well for those who want to edit.
Notes:
The more infill you print the drum at the heavier it will be. I use 70% There is no need to enable support on the drum. There is a sacrificial bridge later you need to break with a screw but it should be very easy to do so.
The only part that needs support is the motor bracket.
The N20s are a snug fit in the chassis. But I use a zip tie just to make sure they are secure.
Use M3 Heatset insert behind the drum to attach the motor holding plate.
Use #3 Plastite screws for the top panels.