Chess set
di Hevizizs81
File stampabili (7)
-
stlKing_V2.stl
30.1 Mo · 21 515 download
-
stlQueen_V3.stl
2 Mo · 20 589 download
-
stl
Bishop.STL
12.5 Mo · 19 837 download
-
stlKnight.stl
11.9 Mo · 22 529 download
-
stlRook.stl
52.7 Mo · 22 778 download
-
stl
Pawn.stl
79 Mo · 22 772 download
-
3mf
magnet.3mf
8 Ko · 18 135 download
Descrizione
I wanted to create an attractive, yet traditional chess set, where the pieces are something special, but you can still recognize them easily. I selected them from different sets (see the list of remixed things), I modified some of them, and adjusted the size to go well together. The chess board is also designed and built by myself, the field size is 40x40mm. If your board is different size, you may want to resize the set.
I also upload a "magnet" file, I implanted a 3x8mm neodimium magnet in all figures. Simply place it at the center of your figure in your slicer, and set it as cutting mesh modifier, and set top/bottom thickness, wall thickness and infill density all to zero (Cura). This way it will be cut from the bottom.
Enjoy, and thanks for all the source designers for the great models!