CoreXY 3d printer

Hi guys

I wanted to make my own printer. This is it!
I went for a CoreXY (http://corexy.com) configuration with a bowden setup. It has a 300x300x280mm build volume.
The printer itself is around 58x51x51cm.
I decided to use SFU1204 ballscrew for the Z axis, synchromesh cables and guitar tensioning mechanisms. 10mm rod for the X axis, and 12mm for the Y axis.

I got inspired by :

Chris Burger's design with his anti-intersection iteration
https://groups.google.com/forum/#!msg/h-bot-and-corexy-3d-printers/jR83iH8H2IM/z2wK4ODaHD0J

Bukobot Vanilla V2 from Diego Porqueras and Whosa whatsis for the linear bearing holding technique.

Most parts are from aliexpress and misumi. Some are custom made (laser cutted aluminium parts)

I will post a BOM with the files for the custom parts as soon as I assemble mine to verify that the cable paths are well aligned.

I will be more than happy to read your opinions/critics/thougths about it!

I have modified the Z axis (Dec 16 2014)