Clay Compass

di myermade

File stampabili (4)

  • stl

    clay_compass_plate_v4.stl

    25 Ko · 609 download

    Scarica
  • stl

    clay_compass_handle_v4.stl

    150 Ko · 596 download

    Scarica
  • stl

    clay_compass_ruler_v4.stl

    908 Ko · 607 download

    Scarica
  • stl

    clay_compass_v4.stl

    1.1 Mo · 738 download

    Scarica

Descrizione

Updated 2.13.24
I redesigned the handle, plate and created a plastic ruler with holes every 1/4'' to make circles from 3''-14''. The new handle and ruler still work with the old plate if you just want to print that section, however the new plate is slightly smaller to allow for a 3'' circle to be made. I don't have experience in 3d modeling so I'm just learning on the fly. Enjoy!

I designed this clay compass to be used with a wooden ruler. You'll need to drill a center hole in your ruler with a 5/16'' drill bit. It is a little tight fit so you might have to ream it out slightly. Your holes for the needle tool can be drilled to fit. I used a 5/64'' for that.

Tag

#circle cutter #clay #clay tools #compass #Pottery #pottery tools