Mechanical pendulum clock
di ZollerLAB
File stampabili (22)
-
stlanchor_1.stl
151 Ko · 81 download
-
stldrive_wheel.stl
150 Ko · 75 download
-
stlescape_wheel_1.stl
308 Ko · 76 download
-
stlgear_a_i5.stl
1.1 Mo · 77 download
-
stlgear_b_i4.stl
1.1 Mo · 75 download
-
stlgear_c_i3.stl
1.1 Mo · 76 download
-
stlgear_d_i3.stl
1.2 Mo · 75 download
-
stlgear_e_i2.stl
988 Ko · 75 download
-
stlgear_f_i4.stl
1.1 Mo · 75 download
-
stlgear_g_i3.stl
1.7 Mo · 75 download
-
stlHour_hand.stl
61 Ko · 76 download
-
stlHour_nut.stl
675 Ko · 75 download
-
stlminute_fixture.stl
83 Ko · 75 download
-
stlMinute_hand.stl
60 Ko · 75 download
-
stlpendulum.stl
269 Ko · 77 download
-
stlpendulum_adjustment.stl
168 Ko · 75 download
-
stlpendulum_cover.stl
174 Ko · 77 download
-
stlpendulum_fix_1.stl
126 Ko · 76 download
-
stlpendulum_fix_2.stl
140 Ko · 76 download
-
stlPlatine_Base_1.stl
720 Ko · 78 download
-
stlPlatine_Cover_1.stl
313 Ko · 75 download
-
stlratchet.stl
79 Ko · 75 download
Descrizione
A 3D printed, weight driven pendulum clock with anchor escapement, minute hand and hour hand. Special about this clock is that all gears are arranged on one shaft and one axle.
Additional items needed to build this clock:
- Fishing line
- Weigt (for example water bottles)
- 28*10 ct coins (as pendulum weight)
- 86 mm, 65 mm and 61 mm long steel rods with 4 mm diameter
- 10*M2x18 screws, nuts and washers
- 5*M5x10 screws, nuts and washers
- Spring with inner diameter slightly greater than 8 mm and easily compressible to 4 mm
- Spring with inner diameter slightly greater than 4 mm and easily compressible to 4 mm
The mechanism of the clock is explained in the following youtube video (the video is only in german):
https://www.youtube.com/watch?v=Ojrbu14cKPg