Thimble Customizable - OpenScad
door rr2s
Printbare bestanden (23)
-
stlThimble-Diam10-Height11.stl
5.3 Mo · 5 900 downloads
-
stlThimble-Diam11-Height12.stl
5.6 Mo · 5 744 downloads
-
stlThimble-Diam12-Height13.stl
6.4 Mo · 5 748 downloads
-
stlThimble-Diam13-Height14.stl
6.6 Mo · 5 742 downloads
-
stlThimble-Diam14-Height15.stl
2.3 Mo · 5 772 downloads
-
stlThimble-Diam15-Height16.stl
2.9 Mo · 5 797 downloads
-
stlThimble-Diam16-Height17.stl
2.8 Mo · 5 831 downloads
-
stlThimble-Diam18-Height20_noTorus_noRenfort_Base.stl
6.9 Mo · 5 746 downloads
-
stlThimble-Diam18-Height20.stl
6.8 Mo · 5 884 downloads
-
stlThimble-Diam18-Height20_noTorus.stl
7 Mo · 5 699 downloads
-
stlThimble-Diam19-Height19.stl
2.9 Mo · 5 704 downloads
-
stlThimble-Diam20-Height20.stl
12 Mo · 5 782 downloads
-
stlThimble-Diam21-Height21.stl
2.9 Mo · 5 695 downloads
-
stlThimble-Diam22-Height22.stl
3 Mo · 5 737 downloads
-
stlThimble-Diam23-Height23.stl
5.9 Mo · 5 700 downloads
-
stlThimble-Diam24-Height24.stl
5.3 Mo · 5 666 downloads
-
stlThimble-Diam25-Height25.stl
6.7 Mo · 5 711 downloads
-
stlthimble-Diam100-Height110.stl
1.9 Mo · 5 645 downloads
-
stlthimble-Diam140-Height150.stl
1.9 Mo · 5 656 downloads
-
stlthimble-Diam190-Height200.stl
1.9 Mo · 5 751 downloads
-
stlthimble-Diam50-Height50Invert.stl
1.4 Mo · 5 697 downloads
-
stlthimble-Diam100-Height110Invert.stl
1.4 Mo · 5 683 downloads
-
stlThimble_Vase.stl
33.9 Mo · 5 731 downloads
Beschrijving
Sewing with thimbles?
Yes a thimble to the size of my finger.
Those who put a background much sewing thimbles
.
A good habit to get into! (we have enough opportunity to pricking with pins to do not overdo it!)
The thimbles is a small honeycombed cap that is put on the finger of the hand holding the needle (right to a right-handed, left for a left-handed).
To sew, we take the needle between thumb and forefinger and shoot with finger. When it is wearing his dice, the tip of the needle is located naturally in one of the die cavities.
Your thimbles must take on the major, but not too tightly, but without falling.
You can choose to make a useful object or a decorative object such as a sewing giant dice. You also do not create the sphere knew it to be a vase or pot shaped thimbles.
You can adjust:
- The diameter of your finger
- The wall thickness
- The height of your thimbles
- The diameter of the holes
- The circular and vertical holes spacing
- Whether or not you want a torus down
- The diameter of the torus
- You can add a backing down or not to put
- You can simply remove the top sphere for make a vase or pot-shaped thimble.
If you are having any difficulties, need advices or you want me to make changes, I remain at your disposal.
If you want to learn OpenSCAD you can follow these video tutorials :
http://www.thingiverse.com/thing:656880