Thimble Customizable - OpenScad
por rr2s
Ficheiros imprimíveis (23)
-
stlThimble-Diam10-Height11.stl
5.3 Mo · 5 900 descargas
-
stlThimble-Diam11-Height12.stl
5.6 Mo · 5 744 descargas
-
stlThimble-Diam12-Height13.stl
6.4 Mo · 5 748 descargas
-
stlThimble-Diam13-Height14.stl
6.6 Mo · 5 742 descargas
-
stlThimble-Diam14-Height15.stl
2.3 Mo · 5 772 descargas
-
stlThimble-Diam15-Height16.stl
2.9 Mo · 5 797 descargas
-
stlThimble-Diam16-Height17.stl
2.8 Mo · 5 831 descargas
-
stlThimble-Diam18-Height20_noTorus_noRenfort_Base.stl
6.9 Mo · 5 746 descargas
-
stlThimble-Diam18-Height20.stl
6.8 Mo · 5 884 descargas
-
stlThimble-Diam18-Height20_noTorus.stl
7 Mo · 5 699 descargas
-
stlThimble-Diam19-Height19.stl
2.9 Mo · 5 704 descargas
-
stlThimble-Diam20-Height20.stl
12 Mo · 5 782 descargas
-
stlThimble-Diam21-Height21.stl
2.9 Mo · 5 695 descargas
-
stlThimble-Diam22-Height22.stl
3 Mo · 5 737 descargas
-
stlThimble-Diam23-Height23.stl
5.9 Mo · 5 700 descargas
-
stlThimble-Diam24-Height24.stl
5.3 Mo · 5 666 descargas
-
stlThimble-Diam25-Height25.stl
6.7 Mo · 5 711 descargas
-
stlthimble-Diam100-Height110.stl
1.9 Mo · 5 645 descargas
-
stlthimble-Diam140-Height150.stl
1.9 Mo · 5 656 descargas
-
stlthimble-Diam190-Height200.stl
1.9 Mo · 5 751 descargas
-
stlthimble-Diam50-Height50Invert.stl
1.4 Mo · 5 697 descargas
-
stlthimble-Diam100-Height110Invert.stl
1.4 Mo · 5 683 descargas
-
stlThimble_Vase.stl
33.9 Mo · 5 731 descargas
Descrição
Sewing with thimbles?
Yes a thimble to the size of my finger.
Those who put a background much sewing thimbles
.
A good habit to get into! (we have enough opportunity to pricking with pins to do not overdo it!)
The thimbles is a small honeycombed cap that is put on the finger of the hand holding the needle (right to a right-handed, left for a left-handed).
To sew, we take the needle between thumb and forefinger and shoot with finger. When it is wearing his dice, the tip of the needle is located naturally in one of the die cavities.
Your thimbles must take on the major, but not too tightly, but without falling.
You can choose to make a useful object or a decorative object such as a sewing giant dice. You also do not create the sphere knew it to be a vase or pot shaped thimbles.
You can adjust:
- The diameter of your finger
- The wall thickness
- The height of your thimbles
- The diameter of the holes
- The circular and vertical holes spacing
- Whether or not you want a torus down
- The diameter of the torus
- You can add a backing down or not to put
- You can simply remove the top sphere for make a vase or pot-shaped thimble.
If you are having any difficulties, need advices or you want me to make changes, I remain at your disposal.
If you want to learn OpenSCAD you can follow these video tutorials :
http://www.thingiverse.com/thing:656880