basic scale wind turbine

por Svenergy

Ficheiros imprimíveis (7)

  • stl

    main2_300mm.STL

    21 Ko · 14 066 descargas

    Descarregar
  • stl

    main1_250mm.STL

    85 Ko · 14 225 descargas

    Descarregar
  • stl

    head_250mm.STL

    76 Ko · 14 117 descargas

    Descarregar
  • stl

    head_300mm.STL

    237 Ko · 14 145 descargas

    Descarregar
  • stl

    Rotor_blade_300mm.STL

    342 Ko · 14 475 descargas

    Descarregar
  • stl

    main1_300mm.STL

    85 Ko · 14 058 descargas

    Descarregar
  • stl

    Rotor_blade_250mm.STL

    343 Ko · 14 452 descargas

    Descarregar

Descrição

this is a simple scale wind turbind model, which was originally designed to fit onto a model railway scenario. There are two versions: one is approx 300mm high and fit to 1:120 scale. The other one is approx. 250mm high and fit to 1:160 scale.
The head and rotor of both versions are prepared to carry a small geared dc motor with 3mm shaft (see pictures). My personal ideal gear ratio is 1:298, then it spins quite slowly.
The 300mm version is made out of two main parts due to limited printing height of my printer. All parts are just plug and play with slight press fit.
I´ve printd the rotor just flat on the build plate with little support, whereas the surface failures are not so important.

Etiquetas

#energy harvesting #model wind mill #modelrailroad #offshore #scale turbine #scale wind generator #turbine #wind generator #windmill #wind turbine