Mining rig

por happysoul

Ficheiros imprimíveis (7)

  • stl

    miner_pieces.stl

    99 Ko · 1 949 descargas

    Descarregar
  • stl

    corner_foot.stl

    48 Ko · 1 957 descargas

    Descarregar
  • stl

    corner.stl

    59 Ko · 1 952 descargas

    Descarregar
  • stl

    corner_with_offset_hole.stl

    49 Ko · 1 912 descargas

    Descarregar
  • stl

    corner_offset_hole.stl

    55 Ko · 1 919 descargas

    Descarregar
  • stl

    switch_power_S.stl

    55 Ko · 1 885 descargas

    Descarregar
  • stl

    spaces.stl

    47 Ko · 1 892 descargas

    Descarregar

Descrição

Hi all this is for a mining rig using 20mm alu. angle. Corners with the feet go underneath and without on top, and have included spacers for the motherboard and angle pieces for the power supplies and a switch holder for turning the computer on.Size you can make what you like mine is 35cm wide by 55cm long by 40cm high with feet.Just have to be mine full of corner intersections (measurement wise)
enjoy hope it helps someone, good mining.