popsocket

por Buchri

Ficheiros imprimíveis (2)

  • stl

    popsocket_base.stl

    26.2 Mo · 1 473 descargas

    Descarregar
  • stl

    popsocket_ring.stl

    150.2 Mo · 1 539 descargas

    Descarregar

Descrição

I increase the base at about 1%. I decrease the ring at about 1%.
Standardprinting without Support. PLA
Assambling with an 1mm metal wire. Glued on the phone with an double side tape