LoRaWAN Sensor Node

por MarkoC

Ficheiros imprimíveis (2)

  • stl

    LoRaWAN_node_body.stl

    62 Ko · 631 descargas

    Descarregar
  • stl

    LoRaWAN_node_lid.stl

    5 Ko · 627 descargas

    Descarregar

Descrição

A case intended for a simple environmental monitoring node. The circuit is based around a 3.3V low-power design.

It's sized for the following components. There's also room in the case for another small I2C board such as luminosity measurement.

  • Arduino Pro Mini (clone)
  • 500mAh LiPo battery
  • Adafruit LiPo charger [1]
  • Haljia-type BME280 clone [eg 2]

[1] https://www.adafruit.com/product/1904
[2] https://www.amazon.co.uk/HALJIA-GY-BME280-3-3-Precision-Barometric-Temperature/dp/B01MUD07SX

Etiquetas

#arduino #LoRaWAN #node #RFM95W #sensor