Raspberry Pi Zero Case

por CO3D

Ficheiros imprimíveis (10)

  • stl

    PiZeroCase_Top_NoLogo.STL

    389 Ko · 10 856 descargas

    Descarregar
  • stl

    PiZeroCase_Top_NoLogo_Pins.STL

    406 Ko · 10 848 descargas

    Descarregar
  • stl

    PiZeroCase_Bottom_NoChamfer.STL

    731 Ko · 10 870 descargas

    Descarregar
  • stl

    PiZeroCase_Top_NoChamfer_Pins.STL

    608 Ko · 10 706 descargas

    Descarregar
  • stl

    PiZeroCase_Top_NoLogo_NoChamfer_Pins.STL

    218 Ko · 10 706 descargas

    Descarregar
  • stl

    PiZeroCase_Bottom.STL

    815 Ko · 11 224 descargas

    Descarregar
  • stl

    PiZeroCase_Top_Logo_Pins.STL

    796 Ko · 10 860 descargas

    Descarregar
  • stl

    PiZeroCase_Top_NoLogo_NoChamfer.STL

    217 Ko · 10 679 descargas

    Descarregar
  • stl

    PiZeroCase_Top_Logo.STL

    779 Ko · 10 807 descargas

    Descarregar
  • stl

    PiZeroCase_Top_NoChamfer.STL

    606 Ko · 10 640 descargas

    Descarregar

Descrição

Case for the Raspberry Pi Zero. Modeled for the 1.3 but should fit all versions. I've included files with and without the logo and with and without the chamfer for printers that have issues with that. On a LCD type resin printer, the first few layers create a slightly extended foot which impacts the chamfer.

Updated the files with a set of tops with pins that should interference fit through the holes in the bottom.

This is the file I used to CNC mill a few from copper and aluminum.

Here's a link to the cap screws I used to hold it together:
https://www.mcmaster.com/#92949A324