Chisel Sharpener

por JorgTheElder

Ficheiros imprimíveis (2)

  • stl

    Full_Set_Chisel_Sharpener_v5.stl

    6.4 Mo · 888 descargas

    Descarregar
  • stl

    Chisel_Sharpener_Assembed_Not_Printable_v5.stl

    6.4 Mo · 860 descargas

    Descarregar

Descrição

I have seen many styles of sharpeners in videos and I decided I needed one.

You will need 2 skateboard bearings, (8x22x7), 2 M6x20 screws, and 2 M6x15 screws. I use nylon socket-head screws. Printed screws would likely split on the layer lines.

Etiquetas

#sharpener