Binary Clock

por pixelEDI

Ficheiros imprimíveis (3)

  • stl

    3d_lid.stl

    440 Ko · 67 descargas

    Descarregar
  • stl

    3D_case_withLogo.stl

    4.4 Mo · 68 descargas

    Descarregar
  • stl

    3D_case_withoutLogo.stl

    4.2 Mo · 68 descargas

    Descarregar

Descrição

This is a DIY binary clock. The case is small enough to fit in a pocket but at the same time large enough for all the components you need. It is equipped with an M3 threaded insert for 3D printing, so you can open and close the lid as often as you like.

The binary clock is running on an ATtiny 44 combined with a shift register and a RTC Module DS1307.

Visit my GitHub site for the source code of this project.

You like it? Then I would be very happy if you treat me to a coffee on ko-fi.com/pixeledi

Check out all my other stuff on:linktr.ee/pixeledi.

Have fun
pixelEDI

Etiquetas

#binary #binary clock #diy #DIY electronics #watch