Raspberry Pi case
par HansH
Fichiers imprimables (18)
-
stlbottom_frame.stl
264 Ko · 9 660 téléchargements
-
stlbottom_full.stl
274 Ko · 10 042 téléchargements
-
stlbottom_fullgpio.stl
311 Ko · 9 683 téléchargements
-
stlbottom_holes.stl
309 Ko · 9 829 téléchargements
-
stlbottom_holesgpio.stl
311 Ko · 9 569 téléchargements
-
stlbottomholder_frame.stl
121 Ko · 9 305 téléchargements
-
stltop_fish1.stl
390 Ko · 9 455 téléchargements
-
stltop_fish1middle.stl
397 Ko · 9 308 téléchargements
-
stltop_fish2.stl
387 Ko · 9 329 téléchargements
-
stltop_fish2middle.stl
394 Ko · 9 320 téléchargements
-
stltop_fullopenlogo.stl
909 Ko · 9 788 téléchargements
-
stltop_fullopenlogogpio.stl
912 Ko · 9 620 téléchargements
-
stltop_holes.stl
379 Ko · 9 468 téléchargements
-
stltop_holesmiddle.stl
379 Ko · 9 371 téléchargements
-
stltop_openlogoholes.stl
915 Ko · 9 474 téléchargements
-
stlftop_frame.stl
289 Ko · 9 290 téléchargements
-
stlftop_openlogo.stl
907 Ko · 9 366 téléchargements
-
stlftop_openlogoholes.stl
913 Ko · 9 466 téléchargements
Description
The Raspberry Pi is a creditcard sized computer which you can buy for $25 or $35 (depending which version)
Never designed a case before, so perhaps things can be better...
......
v11 Different splitlevel (more simple) on backside
keep a little margin on back split, so that top and bottom always fit
added openlogo option
added pcbholder option
changed support studs a bit
changed dimensions to 85.0 x 56.20
v12 Different component locations/sizes
keep a little margin on component holes
pcbsize to 57.0 x 86.0 (actual it is 56.17 x 85.0)
made casestuds wider and added 2 minor holes for self tapping screws
v14 Got a RPI.. so production board measurements...
v15 moved the rca and snd a bit to get them more centered
Thanks to lincomatic at Thingiverse
Added option for GPIO side hole in bottom or top
Added showing GPIO pins with component drawing
If it fits or doesn't, please let me know..
The bottomholder_frame.stl is a standlone minimal frame for a RPi.
All the other bottom_xxx and top_xxx.stl files can be combined.
If you want something specific just take the openscad file and alter it, or just ask...