Raspberry Pi case
por HansH
Ficheiros imprimíveis (18)
-
stlbottom_frame.stl
264 Ko · 9 647 descargas
-
stlbottom_full.stl
274 Ko · 10 030 descargas
-
stlbottom_fullgpio.stl
311 Ko · 9 671 descargas
-
stlbottom_holes.stl
309 Ko · 9 792 descargas
-
stlbottom_holesgpio.stl
311 Ko · 9 557 descargas
-
stlbottomholder_frame.stl
121 Ko · 9 293 descargas
-
stltop_fish1.stl
390 Ko · 9 446 descargas
-
stltop_fish1middle.stl
397 Ko · 9 295 descargas
-
stltop_fish2.stl
387 Ko · 9 321 descargas
-
stltop_fish2middle.stl
394 Ko · 9 289 descargas
-
stltop_fullopenlogo.stl
909 Ko · 9 777 descargas
-
stltop_fullopenlogogpio.stl
912 Ko · 9 604 descargas
-
stltop_holes.stl
379 Ko · 9 435 descargas
-
stltop_holesmiddle.stl
379 Ko · 9 354 descargas
-
stltop_openlogoholes.stl
915 Ko · 9 439 descargas
-
stlftop_frame.stl
289 Ko · 9 258 descargas
-
stlftop_openlogo.stl
907 Ko · 9 353 descargas
-
stlftop_openlogoholes.stl
913 Ko · 9 448 descargas
Descrição
The Raspberry Pi is a creditcard sized computer which you can buy for $25 or $35 (depending which version)
Never designed a case before, so perhaps things can be better...
......
v11 Different splitlevel (more simple) on backside
keep a little margin on back split, so that top and bottom always fit
added openlogo option
added pcbholder option
changed support studs a bit
changed dimensions to 85.0 x 56.20
v12 Different component locations/sizes
keep a little margin on component holes
pcbsize to 57.0 x 86.0 (actual it is 56.17 x 85.0)
made casestuds wider and added 2 minor holes for self tapping screws
v14 Got a RPI.. so production board measurements...
v15 moved the rca and snd a bit to get them more centered
Thanks to lincomatic at Thingiverse
Added option for GPIO side hole in bottom or top
Added showing GPIO pins with component drawing
If it fits or doesn't, please let me know..
The bottomholder_frame.stl is a standlone minimal frame for a RPi.
All the other bottom_xxx and top_xxx.stl files can be combined.
If you want something specific just take the openscad file and alter it, or just ask...