Raspberry Pi case

por HansH

Archivos imprimibles (18)

  • stl

    bottom_frame.stl

    264 Ko · 9 660 descargas

    Descargar
  • stl

    bottom_full.stl

    274 Ko · 10 043 descargas

    Descargar
  • stl

    bottom_fullgpio.stl

    311 Ko · 9 683 descargas

    Descargar
  • stl

    bottom_holes.stl

    309 Ko · 9 831 descargas

    Descargar
  • stl

    bottom_holesgpio.stl

    311 Ko · 9 570 descargas

    Descargar
  • stl

    bottomholder_frame.stl

    121 Ko · 9 305 descargas

    Descargar
  • stl

    top_fish1.stl

    390 Ko · 9 455 descargas

    Descargar
  • stl

    top_fish1middle.stl

    397 Ko · 9 308 descargas

    Descargar
  • stl

    top_fish2.stl

    387 Ko · 9 329 descargas

    Descargar
  • stl

    top_fish2middle.stl

    394 Ko · 9 320 descargas

    Descargar
  • stl

    top_fullopenlogo.stl

    909 Ko · 9 788 descargas

    Descargar
  • stl

    top_fullopenlogogpio.stl

    912 Ko · 9 620 descargas

    Descargar
  • stl

    top_holes.stl

    379 Ko · 9 469 descargas

    Descargar
  • stl

    top_holesmiddle.stl

    379 Ko · 9 371 descargas

    Descargar
  • stl

    top_openlogoholes.stl

    915 Ko · 9 474 descargas

    Descargar
  • stl

    ftop_frame.stl

    289 Ko · 9 290 descargas

    Descargar
  • stl

    ftop_openlogo.stl

    907 Ko · 9 366 descargas

    Descargar
  • stl

    ftop_openlogoholes.stl

    913 Ko · 9 466 descargas

    Descargar

Descripción

The Raspberry Pi is a creditcard sized computer which you can buy for $25 or $35 (depending which version)

Never designed a case before, so perhaps things can be better...

......

v11 Different splitlevel (more simple) on backside
keep a little margin on back split, so that top and bottom always fit
added openlogo option
added pcbholder option
changed support studs a bit
changed dimensions to 85.0 x 56.20

v12 Different component locations/sizes
keep a little margin on component holes
pcbsize to 57.0 x 86.0 (actual it is 56.17 x 85.0)
made casestuds wider and added 2 minor holes for self tapping screws

v14 Got a RPI.. so production board measurements...

v15 moved the rca and snd a bit to get them more centered
Thanks to lincomatic at Thingiverse
Added option for GPIO side hole in bottom or top
Added showing GPIO pins with component drawing

If it fits or doesn't, please let me know..

The bottomholder_frame.stl is a standlone minimal frame for a RPi.
All the other bottom_xxx and top_xxx.stl files can be combined.
If you want something specific just take the openscad file and alter it, or just ask...

Etiquetas

#box #case #openscad #Pi #raspberry #Raspberry Pi