Split flap display module
par Ajaxjones
Fichiers imprimables (13)
-
stldrumidler_V2.stl
90 Ko · 867 téléchargements
-
stlsplit_flap_holder.stl
70 Ko · 866 téléchargements
-
stlSplit_Flap_Drum_V2.stl
169 Ko · 861 téléchargements
-
stlMotormount_V2.stl
295 Ko · 856 téléchargements
-
stldrumgear_V2.stl
238 Ko · 863 téléchargements
-
stlsplit_hub_shaft.stl
15 Ko · 863 téléchargements
-
stlflap.stl
57 Ko · 838 téléchargements
-
stldrummount_V2.stl
96 Ko · 861 téléchargements
-
stlspacer.stl
56 Ko · 833 téléchargements
-
stldrum2_V2.stl
269 Ko · 861 téléchargements
-
stlsplit_flap_-_lifting_eye.stl
219 Ko · 854 téléchargements
-
stldrivegear_V2.stl
357 Ko · 858 téléchargements
-
stlsplit_flap_tank.stl
2.4 Mo · 857 téléchargements
Description
A split flap display using a Wemos D1 R1 and a ULN2003 driver board with the 28byj-48 stepper motors. The original design was from Jonas Bonjeanand I've reworked the files to create this one. The main changes were as follows. Additions to the motor mount to be able to fit the electronics on board , changed the drum internals to fit the shaft along with the placement of a 2mm bolt which secures the flaps onto the drum without having to glue the end cap in place. I also mirrored and changed the drum end support to reflect the main drum and added a faux fuel tank to cover the NC end stop.Full build details and instructional along with the code are on Instructables. See the remix link for the original files.
https://www.instructables.com/id/Split-Flap-Display-Antique-Remix/