Split flap display module
von Ajaxjones
Druckbare Dateien (13)
-
stldrumidler_V2.stl
90 Ko · 867 Downloads
-
stlsplit_flap_holder.stl
70 Ko · 866 Downloads
-
stlSplit_Flap_Drum_V2.stl
169 Ko · 861 Downloads
-
stlMotormount_V2.stl
295 Ko · 856 Downloads
-
stldrumgear_V2.stl
238 Ko · 863 Downloads
-
stlsplit_hub_shaft.stl
15 Ko · 863 Downloads
-
stlflap.stl
57 Ko · 838 Downloads
-
stldrummount_V2.stl
96 Ko · 861 Downloads
-
stlspacer.stl
56 Ko · 833 Downloads
-
stldrum2_V2.stl
269 Ko · 861 Downloads
-
stlsplit_flap_-_lifting_eye.stl
219 Ko · 854 Downloads
-
stldrivegear_V2.stl
357 Ko · 858 Downloads
-
stlsplit_flap_tank.stl
2.4 Mo · 857 Downloads
Beschreibung
A split flap display using a Wemos D1 R1 and a ULN2003 driver board with the 28byj-48 stepper motors. The original design was from Jonas Bonjeanand I've reworked the files to create this one. The main changes were as follows. Additions to the motor mount to be able to fit the electronics on board , changed the drum internals to fit the shaft along with the placement of a 2mm bolt which secures the flaps onto the drum without having to glue the end cap in place. I also mirrored and changed the drum end support to reflect the main drum and added a faux fuel tank to cover the NC end stop.Full build details and instructional along with the code are on Instructables. See the remix link for the original files.
https://www.instructables.com/id/Split-Flap-Display-Antique-Remix/