Parametric modular drawer framework
par bekirdag
Fichiers imprimables (21)
-
stlconnector_1.stl
4 Ko · 1 026 téléchargements
-
stlconnector_2_v2.stl
4 Ko · 1 016 téléchargements
-
stldrawer_holder.stl
6 Ko · 1 016 téléchargements
-
stlconnector_3_v1.stl
15 Ko · 1 016 téléchargements
-
stlconnector_4_v1.stl
24 Ko · 1 026 téléchargements
-
stlconnector_2_v1.stl
13 Ko · 1 017 téléchargements
-
stlstick_4x4x20.stl
2 Ko · 1 014 téléchargements
-
stlconnector_5.stl
26 Ko · 1 008 téléchargements
-
stlstick_4x4x30.stl
2 Ko · 1 011 téléchargements
-
stlconnector_6.stl
29 Ko · 1 014 téléchargements
-
stlconnector_4_v2.stl
19 Ko · 1 012 téléchargements
-
stlstick_4x4x50.stl
2 Ko · 1 006 téléchargements
-
stlstick_4x4x60.stl
2 Ko · 1 006 téléchargements
-
stlstick_4x4x70.stl
2 Ko · 1 009 téléchargements
-
stlstick_4x4x40.stl
2 Ko · 1 009 téléchargements
-
stlstick_4x4x90.stl
2 Ko · 1 011 téléchargements
-
stlstick_4x4x100.stl
2 Ko · 1 005 téléchargements
-
stlstick_4x4x80.stl
2 Ko · 1 010 téléchargements
-
stlconnector_3_v2.stl
22 Ko · 1 012 téléchargements
-
stldrawer.stl
148 Ko · 1 017 téléchargements
-
stlknob.stl
198 Ko · 1 002 téléchargements
Description
After trying a number of different drawers from Thingiverse, I decided to build my own.
I wanted to build something:
- Easy to install
- Less print time
- Modular structure, so I can add more drawers later if I need to
- Less filament usage
After a number of trial and errors, I finally managed to build a solid structure.
Print settings:
I used 10% infill for most all the parts, just make sure you print the connectors with a good resolution, the rest is not that important.
I used a plastic hammer to connect the sticks together, which might not be necessary in your case if you are strong enough. It just makes it easier to install.
Other than that, it would be a good idea to glue the knobs after printing.
To build the drawer in the picture you will need to print:
- 24 stick_4x4x50.stl
- 40 stick_4x4x100.stl
- 18 connector_5.stl
- 2 connector_3_v2.stl
- 12 connector_4_v1.stl
- 9 drawer.stl
- 9 drawer_holder.stl
- 9 knob.stl
Other stl parts are available for different structures.
Hope you enjoy!