Parametric modular drawer framework
por bekirdag
Ficheiros imprimíveis (21)
-
stlconnector_1.stl
4 Ko · 1 026 descargas
-
stlconnector_2_v2.stl
4 Ko · 1 016 descargas
-
stldrawer_holder.stl
6 Ko · 1 016 descargas
-
stlconnector_3_v1.stl
15 Ko · 1 016 descargas
-
stlconnector_4_v1.stl
24 Ko · 1 026 descargas
-
stlconnector_2_v1.stl
13 Ko · 1 017 descargas
-
stlstick_4x4x20.stl
2 Ko · 1 014 descargas
-
stlconnector_5.stl
26 Ko · 1 008 descargas
-
stlstick_4x4x30.stl
2 Ko · 1 011 descargas
-
stlconnector_6.stl
29 Ko · 1 014 descargas
-
stlconnector_4_v2.stl
19 Ko · 1 012 descargas
-
stlstick_4x4x50.stl
2 Ko · 1 006 descargas
-
stlstick_4x4x60.stl
2 Ko · 1 006 descargas
-
stlstick_4x4x70.stl
2 Ko · 1 009 descargas
-
stlstick_4x4x40.stl
2 Ko · 1 009 descargas
-
stlstick_4x4x90.stl
2 Ko · 1 011 descargas
-
stlstick_4x4x100.stl
2 Ko · 1 005 descargas
-
stlstick_4x4x80.stl
2 Ko · 1 010 descargas
-
stlconnector_3_v2.stl
22 Ko · 1 012 descargas
-
stldrawer.stl
148 Ko · 1 017 descargas
-
stlknob.stl
198 Ko · 1 002 descargas
Descrição
After trying a number of different drawers from Thingiverse, I decided to build my own.
I wanted to build something:
- Easy to install
- Less print time
- Modular structure, so I can add more drawers later if I need to
- Less filament usage
After a number of trial and errors, I finally managed to build a solid structure.
Print settings:
I used 10% infill for most all the parts, just make sure you print the connectors with a good resolution, the rest is not that important.
I used a plastic hammer to connect the sticks together, which might not be necessary in your case if you are strong enough. It just makes it easier to install.
Other than that, it would be a good idea to glue the knobs after printing.
To build the drawer in the picture you will need to print:
- 24 stick_4x4x50.stl
- 40 stick_4x4x100.stl
- 18 connector_5.stl
- 2 connector_3_v2.stl
- 12 connector_4_v1.stl
- 9 drawer.stl
- 9 drawer_holder.stl
- 9 knob.stl
Other stl parts are available for different structures.
Hope you enjoy!