Stackable baskets
von vivamus3d
Druckbare Dateien (42)
-
stlStackableBasket-30x10.stl
593 Ko · 1 511 Downloads
-
stlStackableBasket-29x10.stl
583 Ko · 1 269 Downloads
-
stl
StackableBasket-28x10.stl
563 Ko · 1 314 Downloads
-
stl
StackableBasket-27x10.stl
542 Ko · 1 294 Downloads
-
stl
StackableBasket-26x10.stl
526 Ko · 1 305 Downloads
-
stl
StackableBasket-25x10.stl
511 Ko · 1 486 Downloads
-
stl
StackableBasket-24x10.stl
499 Ko · 1 341 Downloads
-
stl
StackableBasket-23x10.stl
473 Ko · 1 322 Downloads
-
stl
StackableBasket-22x10.stl
458 Ko · 1 381 Downloads
-
stl
StackableBasket-21x10.stl
443 Ko · 1 319 Downloads
-
stl
StackableBasket-20x10.stl
431 Ko · 1 597 Downloads
-
stl
StackableBasket-19x10.stl
405 Ko · 1 336 Downloads
-
stl
StackableBasket-18x10.stl
389 Ko · 1 351 Downloads
-
stl
StackableBasket-17x10.stl
374 Ko · 1 308 Downloads
-
stlStackableBasket-16x10.stl
358 Ko · 1 278 Downloads
-
stl
StackableBasket-15x10.stl
336 Ko · 1 442 Downloads
-
stl
StackableBasket-14x10.stl
323 Ko · 1 317 Downloads
-
stl
StackableBasket-13x10.stl
309 Ko · 1 302 Downloads
-
stl
StackableBasket-12x10.stl
291 Ko · 1 326 Downloads
-
stl
StackableBasket-11x10.stl
271 Ko · 1 305 Downloads
-
stl
StackableBasket-10x10.stl
253 Ko · 1 463 Downloads
-
stl
V1b-StackBasket-30x10.stl
694 Ko · 806 Downloads
-
stlV1b-StackBasket-29x10.stl
685 Ko · 765 Downloads
-
stl
V1b-StackBasket-28x10.stl
665 Ko · 772 Downloads
-
stlV1b-StackBasket-27x10.stl
634 Ko · 763 Downloads
-
stlV1b-StackBasket-26x10.stl
621 Ko · 757 Downloads
-
stl
V1b-StackBasket-25x10.stl
606 Ko · 803 Downloads
-
stlV1b-StackBasket-24x10.stl
595 Ko · 773 Downloads
-
stlV1b-StackBasket-23x10.stl
558 Ko · 769 Downloads
-
stlV1b-StackBasket-22x10.stl
541 Ko · 776 Downloads
-
stlV1b-StackBasket-21x10.stl
533 Ko · 762 Downloads
-
stlV1b-StackBasket-20x10.stl
515 Ko · 809 Downloads
-
stlV1b-StackBasket-19x10.stl
486 Ko · 764 Downloads
-
stlV1b-StackBasket-180x10.stl
468 Ko · 774 Downloads
-
stlV1b-StackBasket-17x10.stl
455 Ko · 760 Downloads
-
stlV1b-StackBasket-16x10.stl
440 Ko · 770 Downloads
-
stlV1b-StackBasket-15x10.stl
407 Ko · 791 Downloads
-
stlV1b-StackBasket-14x10.stl
392 Ko · 764 Downloads
-
stlV1b-StackBasket-13x10.stl
381 Ko · 761 Downloads
-
stlV1b-StackBasket-12x10.stl
365 Ko · 782 Downloads
-
stlV1b-StackBasket-11x10.stl
332 Ko · 758 Downloads
-
stlV1b-StackBasket-10x10.stl
315 Ko · 810 Downloads
Beschreibung
Update-2022-03-04: After the surprising success of version 2 of these baskets (full baskets, all sides with honeycombs), I decided to create a compromise between the two and called it "version 1b". The main difference to v1 is the angled front, which now has honeycombs (like v2), but I kept the closed bottom, so that nothing can fall through. And with the right Slicer settings they do not even need more filament than version 2. (see below)
Yet another set of stackable containers. You can find several different sets of stackable boxes on thingiverse, but many of them are for very small things only or use quite a bit of filament, so the DIY variant isn't much cheaper than buying some boxes.
Therefore I was looking for a compromise between size, stackability and minimal use of filament - stackable baskets of reasonable size. The largest one (30cm x 10cm) need only 100g of filament and of course no support. An due to the honeycomb structure and some stiffeners they are still stable enough.
I decided for 10cm wide and 7.5cm high boxes with different length, up to 30cm, which would just fit straight on a 30x30 cm print bed*). All sizes are stackable on each other. You can also stick a paper label to the front.
Remark: I have also created a remix with "full baskets", i.e. honeycombs also on bottom: thing:5156678